精品国产制服丝袜高跟,亚洲成av人片在线观看www,国产在线精品二区,小嫩批日出水了免费看

     
  中文版 English
 
Hot news:
  Products
IEC Test Finger Probe
IPX1-IPX9K Waterproof Test Equipment
Electrical Appliance Testing Equipment
Environmental Test Chamber
Battery test equipment
Textile Test Equipment
Mechanical testing machine
Plug and socket testing equipment
test package
Laser Power Senser Measurement
Soil Sensor
Hot Product
IPX1 IPX2 Drip Waterproof Test...
UL1439 Sharp Edge Tester
BND-TPK05 IEC 60529 Test Probe...
IEC62368 test probe kit BND-TP...
IEC 61032 Standard Test Probe ...
IEC60320 EN60320 Appliances co...
UL 498 Standard Plugs and Rece...
IPX1 to IPX4 Drip rain test an...
Vertical horizontal vibration ...
IP5X IP6X Sand and dust proof ...
climate constant temperature a...
IPX1 to IPX9 waterproof testin...
 
 
Products
IEC60335-1 clause 21 Hardened Scratching Steel Pin Probe
Name:IEC60335-1 clause 21 Hardened Scratching Steel Pin Probe
Type:BND-HHZ-40
Manufacturer:Welcome to our specialized testing equipment website. We are dedicated to providing high-quality tools and services that comply with international standards, ensuring the safety and reliability of your products.
Product Description:

Product Introduction

IEC60335-1 Clause 21 Hardened Scratching Steel Pin Probe

Product Features:

1. The end of the steel pin is designed in the form of a cone with a 40° angle, fully compliant with IEC60335-1 21.2.

2. ISO 17025 / ILAC calibration certificate available (additional cost).


Detailed Description:

The IEC60335-1 Clause 21 Hardened Scratching Steel Pin Probe is an essential tool for testing the strength of solid insulation against penetration by sharp implements. This probe is meticulously designed to meet the stringent requirements set forth in the IEC60335-1 standard, ensuring accurate and reliable test results.

Key Specifications:

*Cone Angle: The end of the steel pin is conically shaped at a precise angle of 40°, ensuring compliance with IEC60335-1 21.2.
*Tip Radius: The tip is rounded with a radius of 0.25 mm ± 0.02 mm, providing consistent performance during tests.
*Testing Angle: The pin is held at an angle of 80°–85° to the horizontal during testing.
*Force Applied: A force of 10 N ± 0.5 N is exerted along its axis during scratching tests.
*Scratching Speed: The pin moves along the surface at approximately 20 mm/s, creating two parallel scratches spaced sufficiently apart.
*Perpendicular Force Test: A force of 30 N ± 0.5 N is applied perpendicularly to an unscratched part of the surface for further testing.

Compliance Testing

The purpose of this probe is to ensure that accessible parts of solid insulation have sufficient strength to prevent penetration by sharp implements. Compliance is verified through a series of tests involving temperature elevation, scratching, and electric strength assessment.

Test Procedures:

1. Raise the insulation to the temperature measured during Clause 11 tests.
2. Scratch the insulation surface using the hardened steel pin as described above.
3. Apply the test fingernail with a force of approximately 10 N to check for further damage.
4. Conduct an electric strength test with the pin applied perpendicularly.

Calibration Services

We offer ISO 17025 / ILAC calibration certificates for our probes, ensuring they meet international standards for accuracy and reliability. Please note that this service incurs an additional cost.


 
Home  |  Products  |  News  |  About us  |  Feedback  |  Contact us  |  
Copyright © 2008-2015 Hong Kong Bonad Technology Limited | Shenzhen Bonad Instrument Co., LTD. All Rights Reserved.
 
    Add:C505, Hongdu Building,Bao\'an45 district,Shenzhen,518101,Guangdong Province,China    Tel:+86-13380391156    Fax:0755-23721200    Email:Alice@szbonad.com