精品国产制服丝袜高跟,亚洲成av人片在线观看www,国产在线精品二区,小嫩批日出水了免费看

     
  中文版 English
 
Hot news:
  Products
IEC Test Finger Probe
IPX1-IPX9K Waterproof Test Equipment
Electrical Appliance Testing Equipment
Environmental Test Chamber
Battery test equipment
Textile Test Equipment
Mechanical testing machine
Plug and socket testing equipment
test package
Laser Power Senser Measurement
Soil Sensor
Hot Product
IPX1 IPX2 Drip Waterproof Test...
UL1439 Sharp Edge Tester
BND-TPK05 IEC 60529 Test Probe...
IEC62368 test probe kit BND-TP...
IEC 61032 Standard Test Probe ...
IEC60320 EN60320 Appliances co...
UL 498 Standard Plugs and Rece...
IPX1 to IPX4 Drip rain test an...
Vertical horizontal vibration ...
IP5X IP6X Sand and dust proof ...
climate constant temperature a...
IPX1 to IPX9 waterproof testin...
 
 
Products
Battery Extrusion Testing Machine
Name:Battery Extrusion Testing Machine
Type:BND-JY-20KN
Manufacturer:BONAD could provide all kinds of battery test machines,more details,please contact us.
Product Description:

BND-JY-20KN Battery Extrusion Testing Machine

Product name:

Name: Battery Extrusion Testing Equipment

Model: BND-JY-20KN

Use:

The safety performance of the battery is verified by the extrusion test. After the test, the battery should not ignite or explode; it is also an indispensable testing equipment for battery manufacturers and research institutes.

Experiment method:

1. Extrusion test method:

A: The battery is placed between the two plates for extrusion. The pressing force was applied by a hydraulic head having a piston having a diameter of 32 mm. Squeeze one

The pressure reading up to the hydraulic head reaches 17.2 MPa and the force is approximately 13 KN. Once the maximum pressure is reached

It can be relieved of pressure.

B: The cylindrical ring-shaped battery is to be subjected to extrusion with its longitudinal axis parallel to the plane of the pressing device. The prismatic battery also has to be around its longitudinal

The shaft is rotated 90o so that both the wide side and the narrow side can withstand the squeezing force. Each sample battery is only in one

Pressure in one direction. Different samples are used for each test.

C: coin-type or button-type battery, so that the plane of the battery is pressed against the plane of the extrusion device.

Standard basis:

GB 31241-2014, GB/T 8897.4-2008, YD/T 2344.1-2011, GB/T 21966-2008, MT/T 1051-2007, YD 1268-2003, GB/T 19521.11-2005, YDB 032-2009, UL 1642, UL 2054, IEC 62281, IEC 60086, IEC62133 and other related battery standards

Features:

1. Push-button controller, which can set pressure, hold time, etc.

2. Self-contained lighting system, inner box material is made of resistant combustion material;

3. The time can be set, the precision is higher, and the maximum force value is directly displayed;

4. It has an exhaust vent (to facilitate the customer to discharge the odor generated in the battery test to the test room);

5. Double-layer explosion-proof glass window, explosion-proof box, free-standing controller (easy to operate and safer).

Technical Parameters:

1

Pressure range

1KN ~ 20KN (adjustable)

2

The diameter of the upper pressure plate

150mm (not less than 20cm2)

3

Force error

1%

4

Unit conversion

Kg/N/Lb (kg / Newton / pound) three units conversion

5

Test power mode

hydraulic

6

Test space

W200 × D200 × H200mm

7

Window size

200 × 200mm (10mm thick double-layer explosion-proof glass)

8

Exhaust fan port

150mm in diameter (with exhaust fan on the rear side of the cabinet)

9

Air supply port:

There are two 50mm

10

Outer box size

W680 × D570 X H1740 (mm)

11

The bottom of the box

four universal pulleys underneath, which can move freely

12

Explosion-proof purpose

Prevent battery explosion and injury to people and things around.

13

Lighting

The top of the box is equipped with lights

14

Control box size

W330 × D330 × H1040 (mm)

15

Machine weight

about 200Kg

16

Use voltage

AC 380V/50HZ three-phase four-wire + protective ground wire

17

Total power:

1.5KW





 
Home  |  Products  |  News  |  About us  |  Feedback  |  Contact us  |  
Copyright © 2008-2015 Hong Kong Bonad Technology Limited | Shenzhen Bonad Instrument Co., LTD. All Rights Reserved.
 
    Add:C505, Hongdu Building,Bao\'an45 district,Shenzhen,518101,Guangdong Province,China    Tel:+86-13380391156    Fax:0755-23721200    Email:Alice@szbonad.com